MDM300
Advanced Dew-Point Hygrometer
A high-speed portable dew-point hygrometer, offering rapid spot-check measurements of dew point or moisture content in many applications, including compressed air, natural gas and highvoltage switchgear quench gas. This lightweight, ATEX, IECEx, FM, CSA, GOST and INMETRO certified product allows more measurements per working hour than any other comparable product. A hard-wearing but ergonomic case and an easy-to-use interface allows comfortable and practical operation in the toughest industrial environments.
Highlights
- Repeatedly fast measurements at low pressure from less than 15 minutes for T95 to -60°C
- Higher pressure measurements possible up to 350 barg
- Long battery life: up to 48 hours of typical use between charges
- Intuitive application kits allow quick and straightforward connection to your sample point
- Durable, yet easy to handle and operate: designed for use in industrial environments
- 4-20 mA external device input for transmitter calibration and validation
- Lightweight: less than 1.5kg
- 13 point traceable calibration certifi cate
Applications
Petrochemical – Metallurgy –
MDM300 |
|
| Measurement technology | Michell ceramic sensor |
| Accuracy | ±1°C from -60 to +20°C dew point ±2°C from -100 to -60°C dew point ±0.2°C temperature |
| Calibrated range Spot checks: Online analysis: |
-70 to +20°C dew point |
| Measurement units | °C, °F, K dew point & gas temperature ppmV, ppmW for air, N2, H2, CO2, SF6 % RH, g/m3, g/kg Option: active pressure (bara/g, psig, MPa, KPa) |
| Resolution (display) | 0.1 for all dew-point derived units and autoranging where appropriate |
| Resolution (measurement) | Better than 0.1°C dew point |
| Typical response speed | T95 in .15 minutes to -60‹C dew point |
| Electrical Input/Output | |
| Auxiliary inputs | 4-20 mA loop-powered external input selectable as either dew point, temperature or pressure |
| Battery type | NiMH 4.8V |
| Battery operating Life | Up to 48 hours of typical usage between charges |
| Battery charger | Intelligent charger (supplied) |
| Operating Conditions | |
| Operating pressure | 350 barg max |
| Operating environment | Outdoors 0 to +100% RH condensing |
| Operating temperature | -20 to +50°C |
| Storage/transport temperature | -40 to +70°C |
| Mechanical Specifications | |
| Display | Blue LCD graphical display |
| Enclosure type | Steel fi bre-loaded high-impact polyamide 6 |
| IP/NEMA rating | IP66/NEMA 4 |
| Gas connections | 1/8” NPT female (other options available) |
| Flow across sensor | 0.2 to 1.2 Nl/min |
| Gas wetted materials | AISI 316L stainless steel |
| Outline dimensions | 218mm x 170mm x 90mm (d x w x h) |
| Weight | 1.35kg |
| General | |
| Data logging | 8 megabytes; Log interval: 5 to 60 sec; Logs per log fi le: Up to 10,000 |
| Communications | (Wireless) BluetoothTM range up to 5m (version 2.0) |
| User interface languages | English, French, German, Italian, Portuguese, Spanish |
| Certifi cation Codes | CE |
- Overview
-
MDM300
Advanced Dew-Point Hygrometer
A high-speed portable dew-point hygrometer, offering rapid spot-check measurements of dew point or moisture content in many applications, including compressed air, natural gas and highvoltage switchgear quench gas. This lightweight, ATEX, IECEx, FM, CSA, GOST and INMETRO certified product allows more measurements per working hour than any other comparable product. A hard-wearing but ergonomic case and an easy-to-use interface allows comfortable and practical operation in the toughest industrial environments.
Highlights
- Repeatedly fast measurements at low pressure from less than 15 minutes for T95 to -60°C
- Higher pressure measurements possible up to 350 barg
- Long battery life: up to 48 hours of typical use between charges
- Intuitive application kits allow quick and straightforward connection to your sample point
- Durable, yet easy to handle and operate: designed for use in industrial environments
- 4-20 mA external device input for transmitter calibration and validation
- Lightweight: less than 1.5kg
- 13 point traceable calibration certifi cate
Applications
Petrochemical – Metallurgy –
- Technical Specifications
-
MDM300
Measurement technology Michell ceramic sensor Accuracy ±1°C from -60 to +20°C dew point
±2°C from -100 to -60°C dew point
±0.2°C temperatureCalibrated range
Spot checks:
Online analysis:-70 to +20°C dew point
-100 to -70°C dew pointMeasurement units °C, °F, K dew point & gas temperature ppmV, ppmW for air, N2, H2, CO2, SF6
% RH, g/m3, g/kg
Option: active pressure (bara/g, psig, MPa, KPa)Resolution (display) 0.1 for all dew-point derived units and autoranging where appropriate Resolution (measurement) Better than 0.1°C dew point Typical response speed T95 in .15 minutes to -60‹C dew point Electrical Input/Output Auxiliary inputs 4-20 mA loop-powered external input selectable as either dew point, temperature or pressure Battery type NiMH 4.8V Battery operating Life Up to 48 hours of typical usage between charges Battery charger Intelligent charger (supplied) Operating Conditions Operating pressure 350 barg max Operating environment Outdoors 0 to +100% RH condensing Operating temperature -20 to +50°C Storage/transport temperature -40 to +70°C Mechanical Specifications Display Blue LCD graphical display Enclosure type Steel fi bre-loaded high-impact polyamide 6 IP/NEMA rating IP66/NEMA 4 Gas connections 1/8” NPT female (other options available) Flow across sensor 0.2 to 1.2 Nl/min Gas wetted materials AISI 316L stainless steel Outline dimensions 218mm x 170mm x 90mm (d x w x h) Weight 1.35kg General Data logging 8 megabytes; Log interval: 5 to 60 sec; Logs per log fi le: Up to 10,000 Communications (Wireless) BluetoothTM range up to 5m (version 2.0) User interface languages English, French, German, Italian, Portuguese, Spanish Certifi cation Codes CE - Downloads
