Emtek HPD
“Hybrid” HPD for use with RCG and P100 for Microbial Testing,
and Laser Particle Counters for Total Particulate testing.
EMTEK Filtered Total Particulate/Microbial High Pressure Diffuser (HPD);
Unique compressed air/gas sampling device, which allows for attachment and sampling of a compressed air/gas system with the use of a unique autoclavable high pressure diffuser, with filtered exhaust. The diffuser works in conjunction with EMTEK’s RCG Compressed Air/Gas Sampler, or P100 Portable Microbial Air Sampler, and laser particle counters for both microbial & total air particulate testing at 28.3, 50, 75, and 100 LPM.
Emtek HPD2 |
|
HPD Material / Finish | 316 Stainless Steel / Electro-polished |
Equipment/Flow Compatibility | V100/RCG (28.3, 50 & 100 LPM), P100 (28.3 & 100 LPM) 1 CFM, 28.3, 50, 75 and 100 LPM Laser Particle Counter (LPC) |
HPD Pressure Ranges (Approx) | V100/RCG, and LPC’s: -1 CFM, 28.3, 50/15-18 to 125 PSI (1.3-8.6 bar) -75 or 100 LPM/18-21 to 125 PSI (1.5-8.6 bar) P100 (with Compressed Gas Kit) -28.3 LPM / 6-80 PSI (0.5-6.5 bar) -100 LPM / 26-110 PSI / 1.8 – 7.6 bar) |
HPD Fittings/Adapters tubing to LPC & P100 or RCG/Outlet Side (Barb) | 0.500”/0.375“/0.188“ OD (28.3/50 LPM for LPC’s) & 0.500“ OD (28.3/50 LPM for P100 or RCG), or 0.500“ OD (75/100 LPM) |
- Overview
-
Emtek HPD
“Hybrid” HPD for use with RCG and P100 for Microbial Testing,
and Laser Particle Counters for Total Particulate testing.EMTEK Filtered Total Particulate/Microbial High Pressure Diffuser (HPD);
Unique compressed air/gas sampling device, which allows for attachment and sampling of a compressed air/gas system with the use of a unique autoclavable high pressure diffuser, with filtered exhaust. The diffuser works in conjunction with EMTEK’s RCG Compressed Air/Gas Sampler, or P100 Portable Microbial Air Sampler, and laser particle counters for both microbial & total air particulate testing at 28.3, 50, 75, and 100 LPM.
- Technical specification
-
Emtek HPD2
HPD Material / Finish 316 Stainless Steel / Electro-polished Equipment/Flow Compatibility V100/RCG (28.3, 50 & 100 LPM), P100 (28.3 & 100 LPM) 1
CFM, 28.3, 50, 75 and 100 LPM Laser Particle Counter (LPC)HPD Pressure Ranges (Approx) V100/RCG, and LPC’s:
-1 CFM, 28.3, 50/15-18 to 125 PSI (1.3-8.6 bar)
-75 or 100 LPM/18-21 to 125 PSI (1.5-8.6 bar)
P100 (with Compressed Gas Kit)
-28.3 LPM / 6-80 PSI (0.5-6.5 bar)
-100 LPM / 26-110 PSI / 1.8 – 7.6 bar)HPD Fittings/Adapters tubing to LPC & P100 or RCG/Outlet Side (Barb) 0.500”/0.375“/0.188“ OD (28.3/50 LPM for LPC’s) & 0.500“ OD (28.3/50 LPM for P100 or RCG), or 0.500“ OD (75/100 LPM) - Download
EMTEK Compressed air / gas kit
Kit for EMTEK V100 and P100 biocollectors including:
- EMTEK HPD2 28.3 LPM or 100 LPM high pressure diffuser
- Anodized aluminum adapter cone
- Stainless steel clamp connection and PTFE / silicone seals
- 75 cm collection tube
- Overview
-
EMTEK Compressed air / gas kit
Kit for EMTEK V100 and P100 biocollectors including:
- EMTEK HPD2 28.3 LPM or 100 LPM high pressure diffuser
- Anodized aluminum adapter cone
- Stainless steel clamp connection and PTFE / silicone seals
- 75 cm collection tube
Head for horizontal flows
Anodized aluminum sampling head for P100 microbial air sampler
- Overview
-
Head for horizontal flows
Anodized aluminum sampling head for P100 microbial air sampler
Autoclavable inlet covers
Inlet covers in anodized aluminum or stainless steel 316 for Emtek V100, R100 and P100 microbial air samplers.
Flow rates : 28.3 LPM, 50 LPM and 100 LPM
- Overview
-
Autoclavable inlet covers
Inlet covers in anodized aluminum or stainless steel 316 for Emtek V100, R100 and P100 microbial air samplers.
Flow rates : 28.3 LPM, 50 LPM and 100 LPM
RAS – Remote Autoclavable Samplers
Remote Autoclavable Samplers for Emtek V100, R100 and P100 microbial air samplers.
- 316 Stainless Steel base with adjustable media stage
- 28.3 LPM, 50 LPM or 100 LPM anodized aluminium or 316 Stainless Steel inlet covers
- Connection fitting tubing 0.375 “, 0.500” or SNT in 316 Stainless steel
- Tripod mounting hole
- Overview
-
RAS – Remote Autoclavable Samplers
Remote Autoclavable Samplers for Emtek V100, R100 and P100 microbial air samplers.
- 316 Stainless Steel base with adjustable media stage
- 28.3 LPM, 50 LPM or 100 LPM anodized aluminium or 316 Stainless Steel inlet covers
- Connection fitting tubing 0.375 “, 0.500” or SNT in 316 Stainless steel
- Tripod mounting hole
Adapter kit for 1 RAS – Remote Autoclavable Sampler
Kit for Emtek P100 microbial air sampler including:
- 316 Stainless Steel base with adjustable media stage
- Anodized aluminum open flow inlet cover
- P100 Remote Sampling Inlet
- 1.5m (5 feet) of Bev-a-line 0.500 “ID tubing
- Overview
-
Adapter kit for 1 RAS – Remote Autoclavable Sampler
Kit for Emtek P100 microbial air sampler including:
- 316 Stainless Steel base with adjustable media stage
- Anodized aluminum open flow inlet cover
- P100 Remote Sampling Inlet
- 1.5m (5 feet) of Bev-a-line 0.500 “ID tubing
Adaptater kit for 2 RAS – Remote Autoclavable Samplers
Special dual port inlet cover for connecting 2 RAS on the same P100 EMTEK microbal air sampler
Flow inlet cover including 2 Stainless Steel Inlet Barbs 316 for 0.375″ ID tubing
- Overview
-
Adaptater kit for 2 RAS – Remote Autoclavable Samplers
Special dual port inlet cover for connecting 2 RAS on the same P100 EMTEK microbal air sampler
Flow inlet cover including 2 Stainless Steel Inlet Barbs 316 for 0.375″ ID tubing
Inlet cover lid for EMTEK P100 inlet covers
Inlet lid in white Delrin with silicon o-ring seal for RAS – Remote Autoclave Sampler
- Overview
-
Inlet cover lid for EMTEK P100 inlet covers
Inlet lid in white Delrin with silicon o-ring seal for RAS – Remote Autoclave Sampler
Tubing
High conductivity antistatic tubing for EMTEK microbial air samplers and particle counters:
- EMTEK P100, V100 & R100
- MET ONE 341x (28.3 LPM /1 CFM), MET ONE 342x (50 LPM)
- MET ONE 3445 (100 LPM)
- MET ONE 6015, 6015P & 7015 (28.3 LPM /1CFM)
- MET ONE HHPC+
- LASAIR II 310A, 310B, 510A (28.3 LPM /1CFM)
- LASAIR II 350L & 550L (50 LPM)
- LASAIR III 310B & 310C (28.3 LPM /1CFM)
- LASAIR III 350L (50 LPM)
- LASAIR III 5100 (100 LPM)
- AIRNET 510 & AIRNET II 510 (28.3 LPM /1CFM)
- ISOAIR 510 PLUS & ISOAIR 310P (28.3 LPM /1CFM)
- Overview
-
Tubing
High conductivity antistatic tubing for EMTEK microbial air samplers and particle counters:
- EMTEK P100, V100 & R100
- MET ONE 341x (28.3 LPM /1 CFM), MET ONE 342x (50 LPM)
- MET ONE 3445 (100 LPM)
- MET ONE 6015, 6015P & 7015 (28.3 LPM /1CFM)
- MET ONE HHPC+
- LASAIR II 310A, 310B, 510A (28.3 LPM /1CFM)
- LASAIR II 350L & 550L (50 LPM)
- LASAIR III 310B & 310C (28.3 LPM /1CFM)
- LASAIR III 350L (50 LPM)
- LASAIR III 5100 (100 LPM)
- AIRNET 510 & AIRNET II 510 (28.3 LPM /1CFM)
- ISOAIR 510 PLUS & ISOAIR 310P (28.3 LPM /1CFM)
R2S – REMOTE-SLIT-SAMPLER
The R2S Microbial Air Sampler incorporates industry standard Slit-to-Agar methodology with comparable microbial recovery/sensitivity, offering a highly accurate analysis of air quality. The R2S is designed for monitoring clean rooms, LAF Hoods and Isolators, but can be employed for monitoring in virtually any critical environment. It is designed to allow for sanitization of all surfaces exposed to the environment while its streamlined design affords minimal disruptive effects on Laminar Airflow in critical environments.
- Constructed of Aluminum / 316 Stainless Steel
- Exterior Finish of White Epoxy/Polyester Coating
- Clear Polycarbonate Dome Assembly w/Distance Gauge
- Weight of 3.25 Pounds
- Dimensions of 5.5″ Height x 5″ Diameter
- Turntable Motor is Synchronous (R2SC) or Stepper (V100)
- Base is Chemically Sanitizable, Dome/Seal Autoclavable
- From 0-120 Minutes of Active Monitoring per Sample Cycle
- Operates at Sample Rates of 28.3, 50 & 100 LPM
- Works with Both the V100 and R2SC Controllers
- Generates virtually no particulate matter
- Uses standard 90mm Test Plates
- Allows for the estimated time of organismal recovery
- Works with Both the V100 and R2SC Controllers
- Overview
-
R2S – REMOTE-SLIT-SAMPLER
The R2S Microbial Air Sampler incorporates industry standard Slit-to-Agar methodology with comparable microbial recovery/sensitivity, offering a highly accurate analysis of air quality. The R2S is designed for monitoring clean rooms, LAF Hoods and Isolators, but can be employed for monitoring in virtually any critical environment. It is designed to allow for sanitization of all surfaces exposed to the environment while its streamlined design affords minimal disruptive effects on Laminar Airflow in critical environments.
- Constructed of Aluminum / 316 Stainless Steel
- Exterior Finish of White Epoxy/Polyester Coating
- Clear Polycarbonate Dome Assembly w/Distance Gauge
- Weight of 3.25 Pounds
- Dimensions of 5.5″ Height x 5″ Diameter
- Turntable Motor is Synchronous (R2SC) or Stepper (V100)
- Base is Chemically Sanitizable, Dome/Seal Autoclavable
- From 0-120 Minutes of Active Monitoring per Sample Cycle
- Operates at Sample Rates of 28.3, 50 & 100 LPM
- Works with Both the V100 and R2SC Controllers
- Generates virtually no particulate matter
- Uses standard 90mm Test Plates
- Allows for the estimated time of organismal recovery
- Works with Both the V100 and R2SC Controllers
RCG – R2S COMPRESSED GAS/CONFINED SPACE
The Remote Compressed Gas/ Confined Space Sampler(RCG) is a remote Slit-to-Agar Impaction sampling device which allows for sampling of compressed air and gas systems, and critical areas where a sampling device cannot be directly placed.
- Constructed of Aluminum / 316 Stainless Steel
- Exterior Finish of White Epoxy/Polyester Coating
- Clear Polycarbonate Dome
- Aluminum Sample Inlet and 316L SS Sanitary Inlet Attachment
- 316 SS Sanitary Clamp, Seal, Sanitary Barb and Vacuum Tubing
- Dome Retention Assembly of Aluminum, 316 SS and Tubing
- Weight of 4 Pounds
- Dimensions of 7.5″ Height x 5″ Diameter
- Base is Chemically Sanitizable, Dome/Seal Autoclavable
- Turntable Motor is Synchronous (R2SC) or Stepper (V100)
- From 0-120 Minutes of Monitoring per Sample Cycle
- Operates at Sample Rate of 28.3 LPM (1 CFM) w/Standard Controller
- Operates at Sample Rate of 50 LPM w/V100 Controller
- Requires EMTEK MICRO HPD Diffuser for Comp Air/Gas Monitoring
- Operates at Sample Rate of 28.3 LPM (1 CFM)
- Overview
-
RCG – R2S COMPRESSED GAS/CONFINED SPACE
The Remote Compressed Gas/ Confined Space Sampler(RCG) is a remote Slit-to-Agar Impaction sampling device which allows for sampling of compressed air and gas systems, and critical areas where a sampling device cannot be directly placed.
- Constructed of Aluminum / 316 Stainless Steel
- Exterior Finish of White Epoxy/Polyester Coating
- Clear Polycarbonate Dome
- Aluminum Sample Inlet and 316L SS Sanitary Inlet Attachment
- 316 SS Sanitary Clamp, Seal, Sanitary Barb and Vacuum Tubing
- Dome Retention Assembly of Aluminum, 316 SS and Tubing
- Weight of 4 Pounds
- Dimensions of 7.5″ Height x 5″ Diameter
- Base is Chemically Sanitizable, Dome/Seal Autoclavable
- Turntable Motor is Synchronous (R2SC) or Stepper (V100)
- From 0-120 Minutes of Monitoring per Sample Cycle
- Operates at Sample Rate of 28.3 LPM (1 CFM) w/Standard Controller
- Operates at Sample Rate of 50 LPM w/V100 Controller
- Requires EMTEK MICRO HPD Diffuser for Comp Air/Gas Monitoring
- Operates at Sample Rate of 28.3 LPM (1 CFM)
Tripod
Compact tripod for Isokinetic probe, handle particule counter, microbial air sampler and fog generator
- Overview
-
Tripod
Compact tripod for Isokinetic probe, handle particule counter, microbial air sampler and fog generator