1120 Protector Case
Sensitive equipment needs protection, and since 1976 the answer has been the Peli™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Peli™ cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
- Watertight, crushproof, and dustproof
- Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Pick N Pluck™ with convoluted lid foam
- Peli’s legendary lifetime guarantee**
* Where applicable by law
1120 Protector Valise |
|
| INTERIOR (L X W X D) | 7.29″ x 4.78″ x 3.33″ (18.5 x 12.1 x 8.5 cm) |
| EXTERIOR (L X W X D) | 8.41″ x 6.76″ x 3.87″ (21.4 x 17.2 x 9.8 cm) |
| LID DEPTH | 0.50″ (1.3 cm) |
| BOTTOM DEPTH | 2.56″ (6.5 cm) |
| TOTAL DEPTH | 3.06″ (7.8 cm) |
| INT VOLUME: | 0.07 ft³ (0.002 m³) |
| WEIGHT WITH FOAM | 1.43 lbs (0.6 kg) |
| WEIGHT EMPTY | 1.34 lbs (0.6 kg) |
| FOAM LAYERS | Layer 1 (Lid): 1.9 cm – Convolute Layer 2 (Base): 1 cm – Pad Layer 3 (Base): 5.4 cm – Pick N Pluck |
| BODY | Polypropylene |
| LATCH | ABS |
| O-RING | Polymer |
| PINS | Stainless Steel |
| FOAM | 1.3 lb Polyurethane |
| PURGE BOD | ABS |
| PURGE VENT | 3 Micron Hydrophobic Non-Woven |
- Overview
-
1120 Protector Case
Sensitive equipment needs protection, and since 1976 the answer has been the Peli™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Peli™ cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
- Watertight, crushproof, and dustproof
- Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Pick N Pluck™ with convoluted lid foam
- Peli’s legendary lifetime guarantee**
* Where applicable by law
- Technical Specifications
-
1120 Protector Valise
INTERIOR (L X W X D) 7.29″ x 4.78″ x 3.33″ (18.5 x 12.1 x 8.5 cm) EXTERIOR (L X W X D) 8.41″ x 6.76″ x 3.87″ (21.4 x 17.2 x 9.8 cm) LID DEPTH 0.50″ (1.3 cm) BOTTOM DEPTH 2.56″ (6.5 cm) TOTAL DEPTH 3.06″ (7.8 cm) INT VOLUME: 0.07 ft³ (0.002 m³) WEIGHT WITH FOAM 1.43 lbs (0.6 kg) WEIGHT EMPTY 1.34 lbs (0.6 kg) FOAM LAYERS Layer 1 (Lid): 1.9 cm – Convolute
Layer 2 (Base): 1 cm – Pad
Layer 3 (Base): 5.4 cm – Pick N PluckBODY Polypropylene LATCH ABS O-RING Polymer PINS Stainless Steel FOAM 1.3 lb Polyurethane PURGE BOD ABS PURGE VENT 3 Micron Hydrophobic Non-Woven - Download
“All trademarks are registered and/or unregistered trademarks of Peli Products, S.L.U., its affiliates or subsidiaries.”
