AL2221-0419DE Single Lid Case
Trusted for over 40 years by the US Military, Single Lid Cases offer 20% more protective material in the edges and corners, where it is needed most, ensuring that valuable equipment is kept safe from any unforeseen elements. Available in several sizes, these cases are completely customizable with a wide range of bolt-on options like document holders, casters, humidity indicators and much more.
- One-piece construction, molded from lightweight, high-impact polyethylene
- Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
- Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
- Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
- Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
- Reinforced corners and edges for additional impact protection
- Recessed hardware for extra protection
AL2221-0419DE |
|
|
Interior (L×W×D)
|
57.2 x 53.5 x 60 cm |
|
Exterior (L×W×D)
|
64.8 x 61.1 x 64.3 cm |
|
Lid Depth
|
49.8 cm |
|
Bottom Depth
|
10,2 cm |
|
Total Depth
|
60 cm |
|
Int Volume
|
0.018 m³ |
| Weight | 14,5 kg |
| Buoyancy | 240 kg |
| Body material | RotoMolded Polyethylene |
|
Pins Material
|
Stainless Steel |
|
O-Ring Material
|
Silicone sponge |
|
Pins (Alt) Material
|
Aluminium |
|
Purge Body Material
|
Aluminium |
- Overview
-
AL2221-0419DE Single Lid Case
Trusted for over 40 years by the US Military, Single Lid Cases offer 20% more protective material in the edges and corners, where it is needed most, ensuring that valuable equipment is kept safe from any unforeseen elements. Available in several sizes, these cases are completely customizable with a wide range of bolt-on options like document holders, casters, humidity indicators and much more.- One-piece construction, molded from lightweight, high-impact polyethylene
- Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
- Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
- Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
- Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
- Reinforced corners and edges for additional impact protection
- Recessed hardware for extra protection
- Technical specification
-
AL2221-0419DE
Interior (L×W×D)57.2 x 53.5 x 60 cm Exterior (L×W×D)64.8 x 61.1 x 64.3 cm Lid Depth49.8 cm Bottom Depth10,2 cm Total Depth60 cm Int Volume0.018 m³ Weight 14,5 kg Buoyancy 240 kg Body material RotoMolded Polyethylene Pins MaterialStainless Steel O-Ring MaterialSilicone sponge Pins (Alt) MaterialAluminium Purge Body MaterialAluminium - Download
“All trademarks are registered and/or unregistered trademarks of Peli Products, S.L.U., its affiliates or subsidiaries.”
