1430 Peli™ Protector Case
Sensitive equipment needs protection, and since 1976 the answer has been the Peli™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Peli™ cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
- Unique top loading design
- 3 level Pick N Pluck™ with convoluted lid foam
- Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
- Comfortable rubber over-molded handle
- Easy open Double Throw latches
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Stainless steel hardware and padlock protectors
- Peli’s legendary lifetime guarantee**
* Where applicable by law
1430 Peli™ Protector Case
|
|
| Interior (L X W X D) | 34.4 x 14.6 x 29.7 cm |
| Exterior (L X W X D) | 41.7 x 22.1 x 33.4 cm |
| Lid depth | 5.1 cm |
| Bottom left | 24.6 cm |
|
Total Depth
|
29.7 cm |
|
Int Volume
|
0.015 m³ |
|
Weight With Foam
|
2,9 kg |
|
Weight Empty
|
2,5 kg |
|
Buoyancy
|
26,8 kg |
|
Foam Layer
|
Foam Layer 1 (Lid) : 5.1 cm – Convolute
Foam Layer 2 (Base) : 2.5 cm – Pad
Foam Layer 3 (Base) : 7.3 cm – Pick N Pluck
Foam Layer 4 (Base) : 7.1 cm – Pick N Pluck
Foam Layer 5 (Base) : 7.1 cm – Pick N Pluck
|
| Body material | Polypropylene |
|
Latch Material
|
ABS |
|
O-Ring Material
|
Polymere |
|
Pins Material
|
Acier inoxydable |
|
Purge Body Material
|
ABS |
|
Purge Vent Material
|
Hi-Flow Gore-Tex 3 Micron Hydrophobe Non-tissé |
- Overview
-
1430 Peli™ Protector Case
Sensitive equipment needs protection, and since 1976 the answer has been the Peli™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Peli™ cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
- Unique top loading design
- 3 level Pick N Pluck™ with convoluted lid foam
- Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
- Comfortable rubber over-molded handle
- Easy open Double Throw latches
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Stainless steel hardware and padlock protectors
- Peli’s legendary lifetime guarantee**
* Where applicable by law
- Technical Specification
-
1430 Peli™ Protector Case
Interior (L X W X D) 34.4 x 14.6 x 29.7 cm Exterior (L X W X D) 41.7 x 22.1 x 33.4 cm Lid depth 5.1 cm Bottom left 24.6 cm Total Depth29.7 cm Int Volume0.015 m³ Weight With Foam2,9 kg Weight Empty2,5 kg Buoyancy26,8 kg Foam LayerFoam Layer 1 (Lid) : 5.1 cm – ConvoluteFoam Layer 2 (Base) : 2.5 cm – PadFoam Layer 3 (Base) : 7.3 cm – Pick N PluckFoam Layer 4 (Base) : 7.1 cm – Pick N PluckFoam Layer 5 (Base) : 7.1 cm – Pick N PluckBody material Polypropylene Latch MaterialABS O-Ring MaterialPolymere Pins MaterialAcier inoxydable Purge Body MaterialABS Purge Vent MaterialHi-Flow Gore-Tex 3 Micron Hydrophobe Non-tissé - Download
“All trademarks are registered and/or unregistered trademarks of Peli Products, S.L.U., its affiliates or subsidiaries.”
